VAG Performance Diesel Injectors 1.9 & 2.0 TDI

We supply bespoke high-flow injectors for specific engine applications. The fitment of Firad high-flow nozzles and the calibration of the injectors ensure that the flow characteristics of each high-performance VAG diesel injector are balanced for the best possible performance.

Bosch PD injectors are used in various Volkswagen Golf (VAG) applications as they are reliable; the German engineering ensures the build quality allows for an increase in brake horsepower (BHP) without sacrificing the engine’s longevity.

Below is a selection of VAG diesel injectors we supply – get in touch with us to discuss your specific requirements, and we’ll source the right parts for you. Stock depends on the availability of the nozzles.

Firad Performance Injectors | United

What do I get?

Technical Specification
  • Reconditioned Bosch injectors fitted with Firad nozzles.
  • The injector fitting kit, seals and washers are already fitted to the injectors. 
  • Calibration and test reports with fuelling results.
  • Injector fitting instructions and rubber grease to assist in the installation.
Enquire now

1.9lt/2.0lt 8V PD Bosch Injectors

Technical Specification

As part of your performance engine build, our bespoke up-rated injectors fitted with the following nozzles will help achieve the following BHP. We have also found that the best injector body to use is 0414 720 038 – 038 130 073 AL Power achievable is subject to the correct build and re-mapping.

If we send injectors before you return your old units, you must pay the refundable core surcharge upfront. We will pass you the surcharge credit when you return your original units. They will need to conform to our terms & conditions. We need the same part number you receive “like for like.”
Should you have any questions, please don’t hesitate to contact us at 01939 291155

Enquire now
Firad Nozzles:

+ 50% > 260 BHP
+ 80% > 280 BHP
+ 100% > 300 BHP
+ 120% > 330 BHP
+ 160% > 340 BHP

Prices
Send in your units for up-grading:
£180.00 (inc. VAT)

Firad +50% & +80%

Send in your units for up-grading:
£192.00 (inc. VAT)

Firad +100% & +120%

Send in your units for up-grading:
£210.00 (inc. VAT)

Firad +160%

Pay the refundable core surcharge:
£36.00 (inc. VAT)

If we send injectors before you return your old units, you must pay the refundable core surcharge upfront. This is per injector. See our T&C’s

2.0lt 16V PD 140 (BKD) Bosch Injectors

Technical Specification

Wuzetem or Firad + 120% nozzles can achieve up to 350bhp (Stock PD140 Injectors do -235bhp). At maximum delivery, these injectors deliver 30% more than a stock injector. This performance diesel + 120% is a refurbished Bosch PD injector, 03G 130 073 B fitted with genuine Firad or Wuzetem Nozzles. Stock depends on the availability of the 120% Nozzles.

Enquire now
Prices
Send in your units for upgrading:
£204.00 (inc. VAT)
Pay the refundable core surcharge:
£240.00 (inc. VAT)

On return of your original injectors, we’ll credit you £36.00 each, subject to our terms and conditions.

Nozzle Fitment and Calibration

Technical Specification

Specialist equipment is needed to strip and inspect the injectors due to the complex setup of internal locating plates and pins. With every service, we provide a complete strip-down and inspection. Parts are then ultrasonically cleaned and worn parts replaced.

We undertake an electrical check on the solenoid to determine its condition. Send your PD injectors to us with your own high flow nozzles and we’ll fit them and recalibrate your injectors – including an enclosed test report showing the fuel delivery increase. P

rices are per one injector. A new injector seal and washer kit is included within the price.

Enquire now
Prices
Send in your units for cleaning, set up, use of your supplied nozzle and calibration:
£102 (inc. VAT)

Other products

We have a range of products available to improve your engine’s performance and longevity. View our range now.

Understanding our pricing

Send in your units for upgrading

This is the price if you send in your fuel injectors to us for an upgrade. When sending units to us, please include a note within the parcel so we know the units have come from you and include your contact details. The turnaround time for upgraded injectors is usually 3-4 days.


Pay the refundable core surcharge

This is the cost for us to send you injectors when you return your original units. Units that conform with our terms & conditions will result in a credit being passed onto you as a core surcharge. When providing this service, we need the same part number you receive so it is like-for-like.

Specialist services

At our dedicated workshop in Shrewsbury, we provide professional, efficient and expert testing and restoration services. We’re known for our fast and efficient service but we never sacrifice the quality of our service.

View services

Brochure Download

Please enter your email address in order to download our brochure

"*" indicates required fields

This field is for validation purposes and should be left unchanged.